Thursday, January 30, 2014 Exhibiting at NAHB International Builders' Show and Extending Free Admission will be exhibiting at the 2014 International Builders' Show in Las Vegas, Feb. 4-6, 2014. will also be offering free admission to pre-registrants through the IBS website.
--------------------------------------------------------------, New England's leading supplier of real stone veneer (, announced today that it will feature its extensive line of natural thin stone veneer products at the upcoming International Builders' Show in Las Vegas. This event will be held at the Las Vegas Convention Center, February 4-6, 2014.

The IBS, hosted by the National Association of Home Builders, is the largest annual light construction show in the world. Attendees will have access to the exhibit floors of two of the biggest trade shows for design and construction professionals. ( is exhibiting in the south hall at booth #S2469. is inviting all of its customers to attend the event at no charge. In order to receive a free three-day pass, visitors must pre-register online through the IBS website.

At the show, will showcase New England Stone Veneer and other natural stone products through samples, literature, photos, slide shows and expert advice. has more than 250 resellers that work with both residential and commercial customers to achieve the perfect look for any space. Learn more about the wide selection of products and find your local distributor at

Visit for more details

Monday, January 27, 2014

4 Tips to the Perfect Fireplace Stone Installation

A Do-it-Yourselfer's Experience with Colonial Tan Square & Rectangular Natural Thin Veneer

This project includes a fireplace insert that was installed flush with cherry wood entertainment center. To match the warm tones, the Colonial Tan Square & Rectangular Thin Veneer was used around the insert. After completing this DIY project, we received a few helpful tips from the installer.

Tip #1: Mark and cut the stone 3/4 of the way through

In order for these natural stones to fit together, some trimming/shaping is required. Depending on how tight the joints are, more or less cutting will be needed. In this case, a wet tile saw was used. Each stone that needed trimming was cut about 3/4 of the way through and snapped with a masonry hammer.

Tip #2: Finish with a masonry hammer

To avoid showing sawn sides on a natural stone, a masonry hammer is used to break through and rough up the edges. This way, the pieces look much more natural. "Using a Rigid tile saw from Home Depot we cut the stones to fit our space. Beside using the saw to cut the stone 3/4 of the way through (like you said) we used a rock hammer to finish most of the cuts."

Tip #3: Use a non or low sag mortar to build up stones

The Laticrete Masonry Veneer Mortar was recommended to the customer due to its very minimal sag during installation. "Also want to remark on the sag-free mortar that was recommended. We were able to locate some at a masonry contractor supplier and used this special mortar in a thick layer to get the stones flush with the cabinet front surface. It didn't sag in the slightest and held the stones where we wanted them!"

Tip #4: Use color enhancer to bring out rich color tones

Color enhancer accentuates the natural beauty of real stone. In this project, color enhancer was used to bring out the rich warm tones of the Colonial Tan Square & Rectangular Thin Veneer. "We did use an enhancer to bring out the rich tones and we used mortar between the bigger spaces. We are really enjoying the beauty of real stone. It can't compare with the artificial stone we were thinking of buying. Thanks for having the product we needed!"

Are you ready to get your project started? Visit our dealer locator to find your closest distributor.

More Installation Guides, Videos, and Tips

Our Full Line Natural Stone Thin Veneer Product Options